MOON CLASSIC SERIES
i-5080 Integrated Amplifier


  MOON i-5080 Integrated Amplifier

Also available with black faceplate        

 



The i-5080 integrated amplifier combines numerous technologies found in Simaudio MOON preamplifiers and power amplifiers.   Offering very high quality sonic perfromance, it represents an affordable alternative to the MOON i-5. Features include remote control operation, 80 watts per channel into 8 ohms and a preamplifier output.

 



  Significant Design Features

An oversized power supply · A custom proprietary toroidal transformer design with lower magnetic, electrical and thermal loss, yielding a much better power transfer and lower regulation factor, resulting in improved current speed and better dynamics · An extremely short capacitor-free signal path measuring under 20 inches in length from input RCA's to output binding posts, eliminating virtually all potential sources of interference and producing a sonically faster transient response.· Gain section using a Crystal microprocessor functioning as a "shunt to ground" that doesn't degrade sonic performance regardless of the setting · One single-ended audio input which bypasses the gain stage to accomodate a component, such as home-theatre processor, whose own volume control is used instead · amplifier section using a "no overall feedback" design resulting in real-time amplification, more accurate   musical   reproduction with respect to tonality, virtually non-existent intermodulation distortion and the elimination of common phase errors resulting from feedback · Class A output to 5 watts to maintain efficiency · Precision matched Bipolar output devices which offer superb linearity throughout the entire audio frequency spectrum · Accurate matching of the high quality electronic components · A symmetrical circuit design · Pure copper circuit board tracings with extremely low impedance characteristics · Improved reliabilty through the elimination of moving parts · Designed to be powered up at all times for optimal performance · Low operating temperature for a longer than normal life expectancy.

 



  Specifications:

 
Type Solid State
Configuration Stereo
Power Supply Transformer 0.5kVA
Power Supply Capacitance 40,000µF
Class of operation - Preamplifier A - Feedback Differential
Class of operation - Amplifier AB - no feedback
Single Ended Inputs   (RCA) 6
Input Device Types - preamp J-FET
Input Sensitivity 250mV - 3.0V RMS
Input Impedance 12,000 ohms
Tape Output 1
Preamplifier Output 1
Output Device Types - Amp Bipolars - 4 per channel
Output Binding Posts 1 set per channel
Output Power @ 8 ohms 80 Watts per channel
Output Power @ 4 ohms 140 Watts per channel
Output Impedance 0.05 ohms
Damping Factor > 160
Gain Control RBG cs version
Gain 34dB
Dynamic Headroom 6dB
Signal-to-noise Ratio 95dB @ full power
Maximum Output Voltage 26 Volts
Slew Rate 20V/µs
Maximum Current - Peak 20 amperes
Maximum Current - Continuous 11 amperes
Frequency Response 10Hz - 80kHz   +0/-3dB
Crosstalk @ 1kHz -60dB
IMD unmeasurable
THD   (20Hz - 20kHz @ 1 watt) 0.15%
 
Available Faceplate Finishes Black and Silver
Standard Remote Control All-Aluminum Simple Function
Optional Remote Control All-Aluminum Full Function
Optional Phono Section MOON IPS - external
Power Consumption @ idle 45 Watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 4A short fast blow
Fuse Replacement - 230V 2A short fast blow
Warranty   (USA & Canada) 10 Years
Shipping weight 22 lbs / 10 kgs
Dimensions   (W x H x D) 17 x 3 x 15.5 in.   (43 x 7.5 x 39 cm.)

        Specifications are subject to change without notice.


Close this window                             Print this page