LEGACY PRODUCTS
EVOLUTION Series
Andromeda CD Player
Launched: 2005
Discontinued: 2013
MOON Andromeda Silver MOON Andromeda Black
The MOON Andromeda CD Player is a fully-balanced differential design, representing the next generation of MOON high-performance audio components. Using the very finest electronic components in conjunction with an astonishing 24-bit/705.6kHz internal upsampling circuit and several newly developed proprietary technologies, the Andromeda brings the Redbook CD standard to previously unattainable performance levels. Further raising the bar, the MOON Andromeda can be fully integrated into a custom-install environment via an RS-232 port. As well, a plethora of user selectable cosmetic options are available at the time of purchase.

Andromeda Photo Gallery

Inside view of the Andromeda
 
Rear view of the Andromeda
 

Andromeda Technical Features

· Internal upsampling which uses 24-bit/352.8kHz processing
· Ultra high-perfromance 24-bit BurrBrown PCM1798 DAC/digital filter
· MOON Alpha Clocking System with PLL synchronization yielding 25 PPM of jitter
· Digital input for use as a digital-to-analog converter with a music server or external transport
· Fully balanced differential digital and analog circuitry in a dual-mono design
· Separate digital & analog power supplies using independent toroidal transformers
· Power supply voltage regulation includes i²DCf (Independent Inductive DC Filtering); There is one inductor
  dedicated to each integrated circuit type component (DAC, Op-Amp, etc.) in the audio circuit's signal path;
  20 stages in all
· A very short capacitor-free signal path using a DC servo circuit and proprietary 6dB/octave analog filter
· RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
· IR input for external control
· SimLink™ controller port for 2-way communications with other compatible MOON components
· 4-Layer printed circuit boards with pure copper tracings for a much shorter signal path;
  This results in greater sonic accuracy and a dramatically improved signal-to-noise ratio
· Ultra rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the very finest quality electronic components in a symmetrical circuit design
· Includes FRM-2 remote control.
 
Andromeda Detailed Specifications
Configuration Dual-Mono / Fully balanced
Transport Mechanism Philips CD-Pro 2 M
Front Panel Controls Standby · Phase · Digital Input · Time ·
Display · Program · Repeat · Random ·
Front Panel Display Track number ·
Time - elapsed or remaining   (track / disc)
Front Panel LED Indicators Phase · Digital Input · Program · Random ·
Repeat - current track · Repeat - entire disc
Top Panel Controls Play · Pause · Stop · Previous & Next track ·
Forward & Backward scan current track
Top Panel Display Current track number
Digital Filter BurrBrown DF1704
Digital-to-Analog Converters   (4) BurrBrown PCM1704U-K
Frequency Response   (audible) 20Hz - 20kHz   +0/-0.1dB
Frequency Response   (full range) 5Hz - 56kHz   +0/-3dB
THD @ 1kHz, 0dBFS   (A-weighted) < 0.001 %
IMD < 0.003 %
Dynamic Range > 120dB
Signal-to-noise ratio > 125dB @ full output
Slew Rate 50V/µs
Channel Separation > 118dB
Low Level Linearity < ±0.5dB at -90dBFS
Intrinsic Jitter < 10 picoseconds RMS
Analog Outputs - Balanced 1 pair XLR
Analog Output - Single-ended 1 pair RCA
Digital Input S/PDIF (BNC)
Digital Outputs (2) S/PDIF (BNC) and AES/EBU (XLR)
Max. Analog Output @ 0dBFS - XLR 4.0 Volts
Max. Analog Output @ 0dBFS - RCA 2.0 Volts
Analog Output Impedance 50Ω
Digital Output Impedance   S/PDIF 75Ω @ 0.5p-p
Digital Output Impedance   AES/EBU 110Ω @ 3.7Vp-p
SimLink™ Port 1 input + 1 output each on 1/8" mini-jack
RS-232 Port 9-pin female DB connector
IR input 1/8" mini-jack
Remote Control FRM-2 All-Aluminum Full Function
Display Type 8 character dot matrix LED
Power Consumption @ idle 25 watts
AC Power Requirements 120V / 60Hz   220-240V / 50Hz
Fuse Replacement   120V   /   220-240V 500mA short slow blow   /   250mA short slow blow
Shipping weight 79 lbs / 35 Kgs
Dimensions - CD Player   (w x h x d) 18.8 x 5.6 x 16.8 in.   (47.7 x 14.2 x 42.7 cm.)
Dimensions - Power Supply   (w x h x d) 18.8 x 3.9 x 16.2 in.   (47.7 x 9.9 x 41.2 cm.)
  Specifications are subject to change without notice.